ConcreteWaterproofing&Repair

Halo Environmental offers concrete waterproofing for secondary containment. PENETRON® Cementitious Capillary Waterproofing Products are formulations consisting of common cement, quartz, sand (of special grade) and multiple activating chemicals that provide the most effective permanent concrete waterproofing system available.
PENETRON® continuously seals and reseals. once applied, the effect of PENETRON® is permanent, and is backed up by the warranty of our ISO 9002 quality standard.

The PENETRON® chemicals penetrate into the the capillary tracts of the concrete by pressure of osmosis, Brownian movement and dry particle reactions.
The active ingredients of PENETRON® react with various concrete minerals forming insoluble crystals which fill out cracks, pores and voids up to a width of at least 400 microns. This crystalline growth will eventually take place deep inside the concrete structure and has been found as deep as nearly 1 meter from the point of application.
Water molecules (and a wide range of chemicals) are no longer able to pass through the concrete. However, air can still pass allowing the concrete to breathe and avoiding vapor pressure to build.
In the absence of further moisture, PENETRON® components lie dormant. Should moisture recur at any time, the sealing process resumes automatically and advances ever deeper into the concrete.
PENETRON
Used for Waterproofing and chemical protection above and below ground level.
01
PENEPLUG
Forms a rapid setting compound capable of stopping severe leaks under pressure.
02
PENETRON PLUS
A dry-shake, trowel-applied formulation used for horizontal surfaces and precast. It is a selected blend designed for ease of trowel-in application.
03
PENETRON ADMIX
An additive mixed into new concrete at the time of batching for complete integral waterproofing.
04

Have aQuestion?

Contact Form

  • This field is for validation purposes and should be left unchanged.

Close Popup

Questions?Send Us a Message

Contact Form (Popup)

  • This field is for validation purposes and should be left unchanged.