We Aim Above the Mark to Hit the Mark

SPRAY APPLIED POLYURETHANE LINERS

Polyurethane Spray Liner Membrane Advantages:

• UV and fire resistant – ULC 668 Compliant
• Does not require ground cover – makes for easier integrity inspections
• Preserves and protects concrete
• Can be installed in cold weather of -30oC and lower
• No boots, clamps, bolts or caulking required to bond onto walls, piles or pipes
• High chemical resistance

Works great for:

• Concrete sumps and trenches
• Tank farms / tank pads
• Skirting / aprons for water mitigation around large storage tanks
• Bladder systems for compressor buildings
• LDPE / HDPE liner repair

SPRAY FOAM INSULATION

2lbs closed cell Spray Foam Insulation is a perfect solution for all your oilfield outdoor and indoor applications.

Works great for:

• Storage tanks
• Wellheads
• Above ground piping and access points
• Roofs, buildings and skids
• Storage containers

All types of liners and berms can be tested. If there is aggregate over top of the liner, and you cannot visually inspect it, you could have a potential leak.

Halo has pioneered the process to find tiny pin holes in secondary containment liners that the eye can miss or that ground cover can hide.

This unique quality control measure releases thick, non-hazardous, fogging smoke that we pump under the existing liner that seeks out any weak points in the containment area which are easily identified by billowing smoke coming out of any breaches in the liner.

Below are some photos of the damage we found by smoke testing: